HDD Regenerator repairs bad sectors of your hard drive.HDD Regenerator is unique software program for regeneration of physically damaged hard disk drives. It does not hide bad sectors, it really restores them! If you suspect that your hard drive contains bad sectors, you may experience difficulties when you try to copy data from your disk, or notice that your operating system is unstable or discover that you are unable to boot to Windows altogether. But there is no need to panic and start paying lots of money for a business recovery service, or throw out your hard drive thinking that your important information is lost for good. Take advantage of HDD Regenerator - the unique disk recovery program that rescue computers by regenerating hard disk drives from bad sectors.Here are some key features of "HDD Regenerator":• Ability to de... Read more »

The utility can perform drive identification, diagnostics, and repairs on a Western Digital FireWire, EIDE, or USB drive. In addition, it can provide you with the drive's serial and model numbers.


Download from iFolder

Download from DepositFiles

HDDScan is a freeware program for low-level HDD diagnostics. HDDScan supports IDE/SATA/SCSI hard disk drives, RAID arrays, external USB/Firewire hard disks, flash cards. The program can scan the surface, view SMART attributes, adjust AAM, APM (Power Management), etc.


Download from iFolder

Victoria is a freeware program for low-level HDD diagnostics. Victoria supports these interfaces: IDE and Serial ATA.


Download from iFolder

HDD Wipe Tool is a utility for low-level hard disk drive erasing. Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, USB, FIREWIRE. Big drives (LBA-48) are supported. Supported Manufacturers: Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital. The program also supports low-level erasing of FLASH cards using a card-reader. This freeware HDD Wipe utility will erase and re-certify a SATA, IDE or SCSI hard disk drive with any size of up to 281 474 976 710 655 bytes. Will work with USB and FIREWIRE external drive enclosures. Low-level erasing of Flash Cards is supported too. HDD Wipe Tool will clear partitions, MBR, and every bit of user data. The data cannot be recovered after using this utility. The program utilizes Ultra-DMA transfers when possible. WARNING: After running this free wipe tool, the whol... Read more »

Hard drive firmware update utility (Bootable CD ISO) 9.2 Mb
This utility, on the bootable CD, will then examine your system, detect all 2.5/1.8 inch hard drives installed, and then check the firmware revision of the drive. If required, it will prompt you to run the appropriate firmware update program for your drive.
Supported drives:
IBM DARA-2x
IBM DJSA-2x
IBM IC25NxATDA04
IBM IC25TxATDA05
IBM IC25NxATCS04
IBM IC25TxATCS05
IBM IC25NxATCS05
HITACHI DK2x7A-x
HITACHI DK2x8A-x
HITACHI DK2x9A-x
HITACHI DK23AA-x
HITACHI DK23BA-x
HITACHI DK23CA-x
HITACHI DK23DA-x
HITACHI DK23EA-x
HITACHI DK23FB-x
IBM/HITACHI IC25NxATMR04
HITACHI HTS54xM9AT
HITACHI HTS72xM9AT
HITACHI HTS42xM9AT
HITACHI HTS54xG9AT
HITACHI HTS7210xxG9AT00
HITACHI DK1xFA
TOSHIBA MKx09MAT
TOSHIBA MKx19GAX
TOSHIBA MKx26GAX
FUJITSU M... Read more »

SeaTools Diagnostic Suite is Seagate's exclusive disc drive diagnostic software designed to troubleshoot most Seagate hard drive issues.
Desktop edition works with most ATA, SATA, or SCSI drives in desktop systems and has a 98% accuracy rate.
Features: Text and graphics are easy to read and follow.


Download from iFolder

Download from DepositFiles

We’ve came up with a freeware tool that handles LBA48 mode setting as well as HPA and DCO features. It does everything automatically: it extracts the factory capacity; then it restores the factory LBA48, HPA and DCO settings.All you have to do is to run it and click “Restore Capacity”. The program will do the rest.I strongly recommend to re-power your computer before running this tool. That means, completely power off your computer; then power on, start Windows and run the tool.If the tool fails to restore the original capacity, then the most common reason is that your motherboard is blocking HPA and DCO commands. You can check that by running BIOS Setup and looking for things like “DCO” or “HPA”. If nothing helps, try on another computer. If you are brave enough, you can also try the following: run the program, select your hard drive, and then when you see t... Read more »

This MS-DOS boot disk contains the following:
Based on Windows 98 Second Edition boot disk
Drivers for IDE and SATA CDROM
Fixed FDISK.EXE: Support of hard disk drives bigger than 137 GB
Patched FORMAT.COM:
Option /Q (QuickFormat) now can be used to format floppies and hard disks quickly even if they're never been formatted before
MS-DOS version check has been removed
SmartDrive (SMARTDRV.EXE) and other basic MS-DOS stuff such as SYS, ATTRIB, DELTREE, LABEL, MEM, MOVE.
MHDD 4.6 with SCSI/ASPI and ATAPI support and Primary IDE enabled
USB Mass Storage support drivers for MHDD.


Download from iFolder

Download from DepositFiles

The application includes various tools: bad sector repair tool, test speed, S.M.A.R.T. information, surface test, check media stability and controller test.
It's the hard disk drive monitoring and failure prediction and repairing software for repair and testing.
It uses S.M.A.R.T. technology to monitor the health status of hard disk drives, prevents data loss and predicts possible drive fail. This application include HDDBadSectorRepair.


Download from DepositFiles